referencer
effects/toolsa tool for mixing with references (already mixed and mastered songs you’re building your mix on). to use it, edit the module, place your reference in module 02 named “reference”, and exit the module
includes tools for isolating frequency ranges and mid/side information
it is recommended to route the output of this module to any meters or other tools you may have in your project to analyze the reference and your mix
changelog
1.4
- initial upload
controllers
group 1: main controllers
- a/b: enables routing the reference to the output. when disabled, the input signal is routed to the output
- reference starting position: the starting position of the reference file playback
group 2: volume controllers
- original volume: the volume of the input signal. 128 (4096) = -6db, 256 (8192) = 0db
- reference volume: the volume of the reference signal. 128 (4096) = -6db, 256 (8192) = 0db
group 3: filter controllers
- enable lp: enables the isolating lowpass filter
- lp freq: the frequency of the isolating lowpass filter in hertz
- enable hp: enables the isolating highpass filter
- hp freq: the frequency of the isolating highpass filter in hertz
group 4: mid/side controllers
- mid/side mix: the mix of the mid/side information. at 0 only the mids are allowed through, and at 32768 (8000) only the sides are allowed through