stereo meter
effects/toolsa meter for analyzing stereo correlation and related information.
when the correlation meter is enabled and at 1 the stereo information is positively correlated (i.e, they are exactly the same). at 0 the signals are unrelated, and at -1 they are negatively correlated (out of phase). generally you’ll want to keep this meter from 0 to 1, any lower often results in mono translation problems
it is recommended to set the visualizer on this module to the goniometer display with 20 ms buffer
changelog
1.4
- initial upload
controllers
group 1: correlation meter enabling controllers
- enable correlation meter: enables the correlation meter
group 2: correlation meter main controllers
- correlation integration time: the integration time of the correlation meter. higher values decrease the response of the meter
- correlation horizontal display: when the module visualizer is set to the goniometer, this controller makes the meter appear horizontally instead of vertically
group 3: isolation controllers
- isolation freq: the frequency of the isolating bandpass in hertz
- isolation bandwidth: the bandwidth of the isolating bandpass